Foil Worx Hang Tags

You must provide a separate foil mask file: black in the areas you want the foil and white in the areas you do not want the foil. All black areas should be solid 100% K with no other added colors.

b. Since we can only use one type of foil per order, it is not possible to place an order with gold foil on the front and silver foil on the back.

ii. If you order a Foil Worx job with spot UV, you'll need to provide separate mask files for the foil (foil mask) and UV (spot UV mask), in which case you may be required to provide up to 6 files.

iii. Please keep in mind that the foil and UV coating cannot overlap and both should be at least 1/16" apart to avoid foil peeling off.

iv. Please avoid using small/fine text or lines for foil objects. For best results, make sure that foil coverage is less than 50% of the entire print side.

v. Please be aware that there may be up to a 1/16" shift on the placement of the foil. Keep this in mind if you are trying to align foil with other printed artwork on the card.

vi. For better quality we recommend creating mask files in vector-based programs such as Illustrator or CorelDRAW.

Black, blue, copper, gold, red, rose gold, and silver are all available as foil colors.

You can apply 50% foil coverage if it is spread evenly throughout the design. You cannot apply 50% coverage if it covers half of the tag.