Aluminium Floor Graphics

Aluminum floor graphics are printed directly on materials using UV cured inks, rendering it rated for outdoor use. Although this product is designed for outdoor use, harsh weather conditions and extreme traffic may wear down the slip-resistance and require the graphics to be replaced sooner for safety precautions. Indoor applications and locations with lighter pedestrian traffic can prolong the material’s lifespan.

Yes, this material can be used on fairly even, harder surfaces such as concrete, brick, epoxy, etc. For best results, we recommend using a hard rubber roller to roll on the surface of the material after application.

Yes, select Finish Options >> Contour Cut >> Yes.

Files must be submitted in PDF format, without crop marks. Text and graphics should be placed at least 0.5” from the edge of the cutline for safety. Ensure you have 0.5” bleed on all sides of your artwork.

Sweep your desired area clear of dirt, debris, or moisture (if the surface is oily, it may need to be power washed with a commercial degreaser). Peel off the release liner from the floor graphic, lay flat on the surface and compress by hand with a roller. Make sure all edges are completely adhered. The high performance, pressure-sensitive adhesive provides superior holding strength, enabling it to be ready for immediate use. It can be applied at temperatures of 33℉ / 0℃ or above. Please note, you MUST consider the temperature of the surface to which you’re applying. For instance, stone and metal surfaces are often colder than air temperature. It is ALWAYS recommended to test the application when the temperatures hover around freezing. For best results, it is recommended to apply your floor graphic in temperatures of 50℉ or above.

The 4mil vinyl is intended for indoor use only; application must be on dry, clean, and untextured floors. Aluminum floor graphics are heavy duty and intended for outdoor use; application can be on almost all surfaces.