Raised Foil Greeting Cards

1. Raised foil jobs require a mask file. When creating a raised foil job, you must include a raised foil mask file along with the regular print file. The raised foil mask file is used to show where the foil needs to be applied. Please note, the mask file must be a vector file created in vector-based programs such as Illustrator.
2. Please only use solid 100% black color (C 0%, M 0%, Y 0%, K 100%) to indicate where you would like the foil. Do not use shadows, glows, or grayscale images. White will indicate no foil.
3. Knockouts are not recommended since there may be a shift (up to 1/16”) when the foil is applied.

We highly recommend having a solid color behind the foil mask. We do not recommend having any artwork or text under the foil mask since it might be visible through the foil mask. Knockouts are not recommended since there may be a shift (up to 1/16”) when the foil is applied.

Foil coverage should be no more than 30% of the artwork, otherwise the foil will be wavy and won’t look good. The only time a 50% coverage is acceptable is with patterns, thin strokes, or small shapes. Ideally, the size of the area, shape, or image covered with raised foil should not exceed 1” x 1”.

Foil Worx has a flat finish foil whereas raised foil has a raised foil finish, that if you run your fingers over the card you will feel the foil. The height of the foil is approximately 60 microns.

We do not recommend having fonts smaller than 10pt on the raised foil artwork; however, if you use fonts with thicker strokes or bold fonts, we do not recommend having fonts smaller than 12pt.